2250/51/55 - 4250/51/55

Raised Panel Pan Door

Additional Downloads:

• 2" thick door sections are formed from heavy, 25-gauge galvanized draw quality steel
• Section joints are roll-formed into a tongue-and-groove design which produces a superior weather seal
• Inside stiles are made of galvanized steel and stile holes are "dimpled" for increased holding power
• Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl
• Extension or torsion springs are individually computer-calibrated to lift your door
• Extra-heavy paint system consists of .25 mil. primer with rust inhibitor and a .75 mil. coating of baked-on polyester paint in your choice of white, almond, sandstone, or brown
• Hinges are stamped from galvanized steel in a "wide body" pattern for greater stability and longer life
• Models 2251/4251 include 1-3/8" CFC free polystyrene insulation with a vinyl back cover
• Models 2255/4255 include 9/16" CFC free polystyrene insulation with a vinyl back cover
• Models 2251/4251 DASMA TDS-163 calculated R-value* - 6.62
• Models 2255/4255 DASMA TDS-163 calculated R-value* - 3.21

DOOR INSULATION

Each model utilizes a 25 gauge exterior steel skin. Chosen for their weather resistant features, models 2251/4251 utilize a 1-3/8" thick CFC free polystyrene insulation, while models 2255/4255 employs a 9/16" thick CFC free polystyrene insulation with vinyl back covers.

2251/4251 R-value* - 6.62
2255/4255 R-value* - 3.21

Found what you're looking for?
Click here to find a dealer near you.