Impact Resistant Molded Fiberglass Doors
Additional Downloads:
(2701-02-03)
(2751-52)
- Sections are 2" thick with a formed fiberglass face and a 25-gauge flush steel interior skin that is factory-finished in white
- Exterior skins are factory-finished in six designer colors: white, almond, evergreen, mahogany, walnut and oak with optional wood-tone available in oak, mahogany and walnut
- Unfinished (tan) exterior skins are available for field gel staining
- Optional 1/2” insulated designer lites are available with a beveled acrylic face and 1/8” DSB obscure glass back with brass or platinum caming
- Thermally-broken for optimum weather protection
- Concealed steel plates run continuously from top to bottom of each section for fastening hardware
- Optional Appearance Package upgrade available
- White painted end stiles
- Bottom weather seal utilizes an aluminum retainer and extruded virgin vinyl
- Available widths: 8’, 9’, 10’, 12’, 16’ and 18’
- Available heights: 7’ to 14’ in 3” height increments (except 8’3”, 8’6” and 10’3”)
Note: Unfinished doors are for field gel staining only. Follow directions provided by gel stain manufacturer. If field painting is
desired, the door must be factory finished (painted) prior to any painting in the field. Use only oil based or acrylic
latex house paint when repainting doors.
2701-02-03-51-52 DOOR INSULATION
The sections are 2” thick with a formed fiberglass face and a 25-gauge
flush steel interior skin that is thermally-broken for optimum
weather protection.
2701-02-03-51-52 R-value* - 16.95
*R-value testing is in accordance with ASTM C518 standards.