Aluminum Full-View 3295
Commercial

Aluminum Full-View 3295

3295

Our 3295 aluminum garage door draws a substantial presence, even with its simplicity. Clean lines and sleek glass door panels achieve the streamlined look that transforms your home over and over again.

Overview


  • Clean modern look combined with its flexibility, durability and quality
  • 2" Thick Sections with Rail & Stile Construction assembled with through bolts at each vertical stile location
  • Glass or Aluminum Panels (Insulated or ¼” tempered glass available in some sizes)
  • Max Width - 20'2" (contact customer service for larger sizes)
  • Colors – Available in clear anodized aluminum, white or stock RAL powder-coat option in 188 colors
  • Various accessories and options available.

Warranty >>

Sections


  • Section joints are tongue-and-groove for a superior weatherseal
  • Wide bottom rails, top rails, and end stiles create an extra-strong frame for the door
  • Insulated and 1/4" tempered glass is available in some sizes
  • Aluminum panels can be substituted for glass panels
  • Glass or aluminum garage door panels can be easily replaced by removing an inside retainer
  • Bottom "U" type astragal is a standard feature

Insulation:

  • 3/8" Insulation available with aluminum panel option

Colors:

  • Clear anodized (6063-T6)
  • White
  • Optional Colors include RAL powder-coat in 188 colors

Resources

Documents

>>View Door Width/Panels Across Chart
>>View Door Height/Number of Sections Chart

Track


Track Configuration:
  • Tracks are 2' or 3', as specified
  • 12" radius, 15" radius
  • Normal Headroom, Low Headroom, Vertical Lift, High Lift, Incline
  • 20" & 32" radius (2" track & up to 10' high doors only)
Normal Headroom / Standard Lift View >>

Normal Headroom / Standard Lift Image
Low Headroom: Front Mount View >>

Low Headroom Image
Low Headroom: Rear Mount View >>

Low Headroom Image
Vertical Lift View >>

Vertical Lift Image
High Lift View >>

High Lift Image
Incline View >>

Incline Lift Image
Mounting Options:
  • Bracket Mount (leg out), Clip Angle Track, Continuous Angle Track
Bracket Mount View >>

Bracket Mount Image


Clip Angle Track View >>

Clip Mount Image


Continuous Angle Track View >>

Continuous Mount Image


Reverse Angle Mount View >>
Available for Clip Angle & Continuous Angle Track

Reverse Angle Mount Image
Track Gauge:
  • 2" Tracks - up to 8'-0" high = 17 gauge roll-formed galvanized steel
  • 2" Tracks - 8'-0" 10'-0" = 16 gauge
  • 2" Tracks - over 10'-0" = 14 gauge
  • 3" Tracks - 12 gauge

Operation


Counterbalance System (Springs)
  • Oil tempered torsion springs are mounted on a cross-header shaft supported by galvanized steel ball breaking end plates and center bracket(s)
  • Springs are calculated for exact door weight, size and trajectory in accordance with ANSI 102 standards for a minimum of 10,000 cycles
    NOTE: May be specified for higher cycles when available
  • Counterbalance is transferred through galvanized aircraft quality cables secured to bottom of the door
Torsion Spring Assembly Image
Above, Torsion/Spring Assembly with Four Spring Layout, Standard Headroom
Springs

Operation:
  • Manual Operation
  • Motor Operation: Trolley or Jackshaft
  • Chain Hoist Operation
Jackshaft Image
Jackshaft Operation
Trolley Operation Image
Trolley Operation

Hardware


Hinges:
  • 11-gauge or 14-gauge hinges, as specified
Double End Hinges

Rollers:
  • 2" or 3" long-stem or short-stem steel ball bearings rollers
Roller

Brackets:
  • Top fixtures (min. 12 gauge)
  • Bottom fixtures (min. 13 gauge)
Bottom Fixture

Single or Double Edge Endstiles:

Double Hinge Endstiles

Glass Options


Optional Window Designs:

  • Optional field glazing
  • 1/8" (DSB or tempered) plain, tinted or frosted
  • 1/8" polycarbonate
  • 1/4" (tempered) plain, tinted or frosted
  • 1/4" clear or white laminated
  • 1/2" (insulated or tempered insulated) plain, tinted, frosted or low E
  • Custom glass options available. Contact factory.